Looking For A Tactical Plate Carrier Vest? You’ve Come To The Right Place
Most folks understand plate carriers protect your vitals in combat.
But body armor isn’t just for military professionals.
Nope…preppers, survivalists, and concerned citizens worldwide should invest in one.
Because nobody knows what the future holds, but it could include one in which bullets are flying.
So I’ve searched the internet for the best advice, information, reviews, and videos.
From basic to advanced…
Today, I’m going to use my Engineering, Manufacturing, & Gear Review background to share the following information:
AR500 Plate Carrier Veritas
The Veritas Plate Carrier from AR500 is a modular plate carrier fueled by years of feedback and evaluation.
Accepting 10” x 12” body armor plates, it features a minimalistic profile without sacrificing real estate.
It uses durable 3D mesh lines in both the inner plate pockets with inlaid soft loop Velcro pontoon attachment points.
It has removable mesh padded shoulder pads that are included, each featuring tri-loop guides and attachment points.
The low-profile emergency drag handle traverses through the entire back half of the plate carrier for increased strength.
Broad 2” side buckles secure the adjustable straps and are user-removable for increased comfort when running a Veritas™ cummerbund.
Each row of webbing and all high-stress points are Bar-Tack stitches reinforced for durability.
The entire construction is a genuine 500D Cordura nylon for the perfect balance of durability and weight reduction.
It uses impact-resistant buckles to reduce failure points in these critical areas where many carriers fail.
Note: AR500 has one of the best and most comprehensive selections today.
Check out their top plate carriers to help narrow down which setup will work best.
AR500 Armor AR Invictus Plate Carrier
The Invictus Carrier by AR500 is designed to be the lowest profile and lightest carrier possible.
The ultralight construction results in a jumpable plate carrier that weighs in at 1.2 lbs.
This provides extreme mobility without sacrificing comfort or the ability to be fully loaded out.
While The Invictus Vest maintains an extremely low profile, it doesn’t skimp on features.
It can carry full 10×12 armor plates for maximum coverage. Has a reinforced drag handle and pontoon capability, plus full MOLLE coverage.
MayFlower Plate Carrier Vest
The Mayflower Assault Plate Carrier by Velocity Systems is a great all-around armor system.
The Mayflower APC can carry ESAPI/SAPI and Swimmer-cut armor plates.
The cummerbund accommodates standard 6×6 inch side plates or pouches that attach via hook and loop.
The kangaroo pouch up front accepts 3 M4 mags, and the APC features standard PALS webbing for pouch customization.
If you’ve already got a favorite rig, any standard ITW buckles will mount to it.
OneTigris Griffin AFPC Modular Vest
The OneTigris Griffin AFPC Plate Carrier is a popular choice for airsoft. However, it CAN carry standard plates.
The OneTigris Griffin uses 500D Cordura Nylon and UTX Buckles.
It has a detachable Front Design with a removable front MOLLE flap with chest rig compatibility.
It’s highly breathable with detachable mesh padding for good airflow.
Agilite K19 Quick-Release Plate Carriers
The K19 Plate Carrier is one of the most comfortable options on the market.
It’s lightweight, durable, and combat-proven.
The K19 employs an Egress™ Quick-release system and proprietary Fast-Adjust™ Cummerbund that can be adjusted and fine-tuned in real-time, by the wearer.
The K19 also doesn’t skimp on the shoulder or under-plate padding like many other carriers, so it remains comfortable during prolonged use.
The K19 comes with the Agilite Stretch cummerbund as standard, which keeps your vest nice and tight. That way, it won’t bounce when you run.
But when you need to drop to your knees, the carrier doesn’t squash your torso.
The K19 has a unique design in that the shoulder straps. It has a propitiatory “V” shape to center mass, spreading the weight and relieving pressure points.
It’s an overall great vest at a fair price!
Condor Sentry Lightweight Plate Carrier
The Condor Sentry Plate Carrier is designed to have a more comfortable performance.
It fits standard plates and has a beefy emergency drag handle.
Plus, it includes a quick cinch adjustment system for the front.
It also has hook and loop adjustments on the shoulders.
This carrier also has tons of MOLLE on both the front and back.
The bottom line is:
The Condor Sentry is a great budget vest that’s perfect for rapid-response situations.
5.11 Tactical TacTec Plate Carrier 56100
5.11 Tactical brings you the TacTec™ Plate Carrier.
It’s designed to be the most lightweight and best-fitting vest you can find.
The 5.11 TacTec is constructed to ensure high performance while remaining lightweight and mobile.
It can accommodate both medium and large ballistic plates.
And the back yoke shoulder pads help distribute the weight evenly.
Condor Gunner Plate Carrier
The Condor Gunner Lightweight Plate Carrier has a minimalist design.
Smaller in size but just as tough.
The Gunner features a more comfortable fit while still holding standard plates.
It includes MOLLE attachments on the cummerbund for even more utility.
It’s another name for a Tactical Vest.
One that can carry bullet-resistant body armor plates and tactical gear.
A Chest Rig – Not Designed To Carry Plates
A regular chest rig can carry lots of gear but doesn’t have a pocket for body armor plates.
That’s why they’re so popular with military personnel around the world.
They’re considered an important self-defense upgrade for life-threatening situations.
And they’re worn by anyone serious about home and family security.
They’re for anyone who wants to prepare for dangerous combat scenarios.
Body armor allows you to meet three mission-critical goals:
- Stop Holes (with body armor plates)
- Plug Holes (carrying medical gear such as individual first aid kits)
- Make Holes (carry extra mags for your firearms)
As you can tell, all three of these functions are essential in combat.
It’s able to perform these functions because it consists of:
- A Tactical Vest
- A Cummerbund
- Body Armor Plates
Let’s take a moment to discuss each in more detail…
The tactical vest is fairly self-explanatory.
It’s a vest that fits over your head with a front and back panel.
These panels have pockets and/or MOLLE webbing to provide a way to store gear for easy access.
The cummerbund is a lot like a vest belt.
It helps to keep the bottom of the vest tight against your belly.
It’s a wide tactical belt made from an elastic material for a “snug” fit.
This helps keep the vest in place, even when running or scrambling.
Some cummerbunds have Velcro or MOLLE webbing attached for even more tactical gear storage options.
Finally, there are the plates.
You insert plates into the tactical vest to work as advertised.
Hence, the name “plate carrier.”
Most tactical vest includes large, wide pockets with bullet-resistant plates covering your vitals.
Now let’s talk about why you should own one…
In the very broadest sense, it’s for SAFETY and ACCESS.
They protect from small objects flying at insane speeds.
We usually call these small flying objects bullets or shrapnel.
That’s why they are popular for military personnel who expect combat.
If you’re destined to encounter combat, it would be silly NOT to invest in a tactical vest.
You need such a device to add a layer of protection.
Plus, most have MOLLE.
This means you can hang your tactical gear from your chest.
This is better than carrying your gear in a backpack.
With a tactical backpack, you must remove it and open it to access your magazines, radio, etc.
Instead, with a plate carrier, all your critical gear is easy to access in battle.
When it comes to combat – this setup is IDEAL!
There are several additional reasons…
Most search and rescue teams wear chest rigs.
Why? Because they must carry a lot of tactical gear.
But are less worried about getting shot.
They don’t expect a rescue to turn into a combat situation.
However, there are exceptions to this rule.
And with a plate carrier, you HAVE THE OPTION to carry plates or not.
I love optionality.
I can take or leave the plates at home, depending on the situation.
But with a chest rig – I don’t have the option of adding plates should the situation call for it.
That’s why I suggest that even search and rescue team members invest in a plate carrier vs. a chest rig.
Take the “free optionality” (i.e., flexibility) whenever possible.
Maybe you’re someone who worries about the future.
You understand peace and calm are the exceptions and not the rule on a historical basis.
You realize our world would be chaotic in a worst-case disaster or war.
A world of mass-scale looting and rioting.
What could spark such a “doomsday” scenario?
Take your pick…
Paranoid? Maybe.
But none of these must be on a massive scale to create localized havoc and chaos.
Fearful, hungry, thirsty humans can be very dangerous…
If you live in the US, you may not feel an immediate threat.
But that’s being complacent.
No one knows what the future brings, but I know this one fact…
As a species – we now have the technological ability to destroy ourselves.
To wipe ourselves off the map.
You couldn’t say that 100 years ago.
That’s why I believe preparing is not about paranoia – it’s all about being resilient to life’s uncertain future.
It’s seeing the real risk of widespread war and chaos mounting.
So, that’s why I believe in stocking up on the tools, supplies, and gear necessary to protect myself and my family.
This type of body armor is a wise investment and can protect ALL concerned citizens.
Regardless of whether you plan to bug out or stay put.
The other reason you may want to invest is for FUN.
Paintball is one of the fastest-growing sports.
But getting hit in the chest with a paintball (unprotected) can do damage.
It won’t kill you, but you could have tender bruising for weeks.
The average paintball can travel 300 feet per second (fps).
Most paintball playing fields require a maximum of 280 fps for safety purposes.
With those projectile speeds – you’ll want something to protect yourself.
Example Of Airsoft Foam Pad
That way, you can add soft armor foam plates for protection.
Foam plates are lighter than steel plates.
So they’ll provide protection against flying paintballs without weighing you down.
They can be used as a workout tool, to make a workout more strenuous.
For example:
You can wear one (with plates in it) to increase weight.
This makes pull-ups, pushups, running, and swimming much more challenging.
So they are a simple way to take your training to the next level.
Now, anyone who uses these for workouts usually leaves the tactical gear off.
Otherwise, the gear attached to the outside would flop around and make working out a pain in the ass.
Ok, those are the main reasons to own one.
So, let’s discuss some of the key features to look for…
If you want to skip reading this section – you can get almost everything you need to know from this excellent video:
Most fall into the category of “one size fits most.”
They use adjustable straps and an elastic waistband called a cummerbund.
This allows you to customize your plate carrier fit.
With that said:
If you’re extremely petite (or looking to fit a child) OR extra tall/big – you may need to shop around to your unique size requirement.
Of course, with any gear or backpack, the weight comes into play.
The heavier an item is to carry, the more daunting it becomes (especially over long periods).
So, assuming a similar quality – lighter is better.
But here’s the deal – the real “weight” is not in the vest itself – it’s in the plates.
Foam plates for practice or sport (paintball) are extremely lightweight.
But these foam plates are NOT bullet resistant.
For that type of protection, you’ll need steel or ceramic plates, which (as you can guess) are heavier.
We’ll discuss plate options later in this article…
But for now, here’s an article on “Ballistic Armor Levels.”
One of the best and most affordable fabric options is 500D Cordura Nylon.
500D is the abrasive resistance nature of the fabric.
The higher the number, the “stronger.”
500 is solid and usually enough for most missions.
But you can find some with fabric abrasivenesses of 1000 or more…
But watch out for any fabrics with poly mixes – they have lower melting points than Cordura Nylon.
Stitching quality is critical and comes down to three main things to look out for:
- The type of thread used
- The threading techniques used
- The locations of reinforcement
Solid types of thread are bonded 92 or better.
Ideally, the one you choose uses quality thread.
But good lucking finding out what was used.
Rarely do you see the “type of thread” advertised in marketing.
So if this is something you must know – you’ll likely need to contact the manufacturer and ask.
And single sticking is fine throughout as long as it uses bar tack on high-stress points.
But at reinforcement locations, there are two stitching options:
A bar tack stitch uses a specialized machine to create a tough and dense series of threads.
Bar tack stitching is the most effective way to prevent rips and tears at high-stress points.
The alternative method at reinforcement points is called a single stitch build-up.
It’s cheaper to use (because it uses the same sewing machine), but it’s not as effective.
It’s essentially running the sewing machine over the same place several times.
But it cannot get nearly the same level of thread density as a bar tack stitch.
The shoulder attachment points MUST be reinforced.
But generally, the more reinforcement points with bar stitching, the better.
ITW buckles are best.
However, there are a lot of knock-offs that are not as good.
Look for reinforcement pillars inside the buckle – this helps to keep a buckle working for years, even under abusive conditions.
Look for mil-spec webbing and watch out for fake webbing.
You can tell fake webbing when it looks like the same fabric the vest is made of, just folded over and sewn…
The best ones have a mesh buffer and padding between the plate and your body.
This helps to add comfort as well as breathability. 3d spacer mesh – good thickness and good depth – provides more breathability.
However, “mesh-looking fabrics” provide little to no real padding or sweat relief.
Also, a pontoon system is nice.
This is where the outsides of the back foam are slightly thicker, which creates an air channel in the middle of your back.
Gerald Schwartz’s (mil-spec) velcro is considered high quality.
But in general, make sure you test out the Velcro and elastic as soon as you get a chance.
Make sure the velcro is extremely sticky and grippy.
And the elastic is stretchy but strong.
The traditional cut and shape is fairly standard.
However, there are some unique exceptions you may want to consider:
There are carriers specifically designed to be highly concealable.
Hence the name “concealable plate carrier.”
This is a low-profile tactical vest that is thinner than a regular one.
For example:
Let’s say you’re heading to a business meeting with the mafia …
You might want to wear one, but you don’t want them to know!
Here’s The Ferro Concepts Slickster Minimalist (for those interested in low profile).
You can easily throw a concealable one like this under your sport coat – just in case!
Most vests have a pouch for plates in both the front and back, but maybe you don’t want full coverage…
Or maybe you’re just looking to cover your backside (or give your kid something they can take to school for protection from an active shooter).
It’s one way to add a level of protection.
Honestly, any backpack with a slip pocket can add a bullet-resistant plate.
So, don’t get too hung up on the naming convention.
The bottom line is:
You have a plate carrier backpack IF you can fit steel plates into the backpack.
A MOLLE plate carrier is the exact opposite of a concealable one.
Why? Because a MOLLE is designed to hang a lot of tactical gear on the outside of it.
You want to load it with admin pouches, extra magazines, radios, compasses, food, water, etc.
So with MOLLE, you’re not trying to hide the fact you’re wearing a tactical vest.
You’ll use this tactical gear to hold all your stuff right where you can access it FAST.
There are four main color options:
I’ve also come across a Navy-Blue one in my research.
But never anything crazy like orange, pink, purple, red, etc.
The most common color is a simple light brown, sandy brown, or olive-drab color.
It’s because brown is a nondescript color.
You won’t stick out like a sore thumb in a combat situation with a boring sandy brown color.
It’s all about situational awareness.
Maroon, orange, and purple wouldn’t sell well since they would get noticed.
Classic black is also easy to find.
Black is great for concealment at night, but it will not keep you hidden during the day…
There are also a lot of camo color options.
These are ideal for staying concealed in forested terrain.
MultiCam is a specific camouflage pattern developed by Crye Precision.
Lots of people like this MultiCam plate carrier pattern.
It works well in all sorts of environments.
Shoulder straps should allow for a wide range of adjustment and the cummerbund.
Any other adjustments should be considered extra, not necessary.
Having a dedicated water bladder pouch is a nice option to have.
Often these setups include hydration tube clips to bring water from the pouch to your mouth.
Allowing you to take a sip during combat without stopping or losing concentration.
As with any tactical gear, price is a factor. But like most things in life – you get what you pay for.
Sure, you should always look at the cheap plate carriers.
But NEVER settle for an inferior product.
And don’t be afraid to return anything subpar or poorly constructed.
Are you on a bit of a budget?
Then you’re looking for value – decent quality at a reasonable price.
Do you have no budget restrictions?
Then you’re looking for the top-of-the-line and willing to pay for it.
Watch the following video to learn how to set up your new rig:
Most tactical vests DO NOT come with body armor plates – you typically buy those separately.
The good news is the selection of body armor plates is vast.
Plate choice is a massive topic beyond the scope of this article.
However, here are some suggested places to research the RIGHT ones to pair with your new tactical vest.
First off is this Ballistic Level Chart from AR500:
What body armor should you run? Flat, Curved, Curved Buildup, and Square…
Tough Hook Heavy Duty Hanger | 200 lb. Capacity
If you own a plate carrier, you MUST get one of these tough tactical hooks.
Why? Because it’s a patented grip handle. Making it ideal for easy transportation of heavy gear.
It has an I-beam construction and uses an impact-resistant resin. Making this “clothes hanger” nearly indestructible.
It has an incredible 200 lb load capacity!
You should get your tactical vest first before building the rest of your loadout.
Why? Because you can build your gear around your vest.
Instead of trying to make all your gear fit on your vest after the fact.
This helps to keep everything organized and efficient. It also helps to keep weight down.
The bottom line is:
Tactical plate carriers are a must-own for anyone anticipating the possibility of combat or being shot at someday.
Find out now using my Danger Zone County List & Special Report it’s absolutely FREE.
In minutes you’ll know EXACTLY where you stand and if you should be worried or not..
So click here to get my FREE Danger Zone County List & Report….
Click on the image to get the List & Report for FREE and find out if YOU live in a ‘Danger Zone’ County…”
The post Best Tactical Plate Carrier Vests On The Market Today appeared first on Skilled Survival.
Augason Farms Lunch and Dinner Variety Pail Emergency Food Supply 4-Gallon Pail
24% Off
Ready Hour, Fruit & Veggie Mix, Real Non-Perishable Freeze-Dried Food, 30-Year Shelf Life, Portable Emergency and Adventure Food Supply, Durable Flood Safe Container, 56 Servings
ReadyWise Emergency Food Supply, Freeze-Dried Survival Food for Emergencies, Breakfast, Lunch, Dinner, and Drink Mix, 1 Bucket, 25-Year Shelf Life, 52 Servings Total
20% Off
ReadyWise Emergency Food Supply, Freeze-Dried Survival Food for Emergencies, Breakfast, Lunch, and Dinner Entrées, 1 Bucket, 25-Year Shelf Life, 124 Servings Total
5% Off
4Patriots 3-Month Survival Food Kit - Emergency Food Supply, Freeze Dried Food, Designed To Last 25 Years, 688 Servings, 135,440 Total Calories, Disaster-Resistant Packaging
Ready Hour, Emergency Meal Entrées, Real Non-Perishable Meals, 25-Year Shelf Life, Portable, Durable Flood-Safe Container, 120 Servings
Augason Farms Deluxe 30-Day Emergency Food Supply, 200 Servings , Package/Color may vary
Augason Farms Dehydrated and Freeze-Dried Fruit Variety Pail, 25-Year Shelf Life, Emergency Food Supply, Camping Food
Grizzly Gear Emergency Food Rations- 3600 Calorie Blueberry Bar - 3 Day, 72 Hour Supply For Disaster, Hurricane, Flood Preparedness - Less Sugar, More Nutrients Than Leading Brands - 5 Year Shelf Life
Grizzly Gear Emergency Food Rations- 3600 Calorie Bar (Vanilla Poundcake) - 3 Day, 72 Hour Ready to Eat Supply for Disaster, Hurricane, Flood Preparedness - Non Thirst Provoking - 5 Year Shelf Life
- Advertisement -